Skip to content
Avery Point Lock & Key SpecialistsRequest a visit
Open 24/7(249) 488-0915Call now
Technician inspecting splintered wood around a door-frame strike plate. — Break-In Damage Lock Repair, Trent Lakes

Emergency Lockouts · Trent Lakes

Break-In Damage Lock Repair in Trent Lakes

There is a hole where the cylinder used to be. Somebody twisted it out of the deadbolt with a wrench, and now the empty bore looks straight through to the kitchen, with the bolt still stuck in the frame.

Call now · open 24/7(249) 488-0915

Request a visit

In plain words

In a rental or condo the repair involves more than one set of hands. A tenant reports the break-in to the landlord or property manager, who normally arranges the work, because landlords are responsible for repairs and both sides have rules about changing locks and sharing keys. The locksmith secures the door on an authorized instruction, keeps the suite door openable from inside, uses hardware suited to a fire-rated corridor door where that applies, and leaves a clear note of what was done so keys can be handed over properly. Tenants and owners each end up with a working, lockable door and a record they can pass along.

Sound familiar?

They did not get in. The attempt left a screwdriver gouge in the door edge, a strike plate bent outward and a deadbolt that now needs a shove to throw. The lock held, but the door is telling you it was tested.

How the visit goes

Break-In Damage Lock Repair · Trent Lakes

How the visit goes

Technician holding a steel deadbolt to the round bore in a white door, with an open tool bag on a dark mat. — Trent Lakes
  1. 1

    Does the door still hang true

    An impact hard enough to break a strike usually moves the door as well. The locksmith checks that the door sits square in its opening, closes on its weatherstrip without force, and that the bolt lines up with its pocket rather than dragging on the strike lip. Hinge screws are tested for grip, since a kick can pull them from the jamb even on the side that was not attacked, and the hinge leaves are checked for bending. Manufacturers treat strike position, pocket depth and door alignment as working parts of the lock, and a repair that ignores them produces a door that locks badly the day after it was fixed.

  2. 2

    Fitting the new deadbolt and cylinder

    The replacement hardware is chosen for the door and for the attack it suffered. A deadbolt with a full one-inch throw, a hardened insert against sawing and a low-profile face that resists a wrench grip is the usual choice, graded to a recognised durability standard rather than the lightest unit on the shelf. It is matched to the existing bore and backset so no new holes weaken the slab, or the preparation is enlarged cleanly where the old hardware was small. The bolt is tested with the door open, then closed, and the strike adjusted until it throws without dragging. Trim and finish are matched to your other doors where you want that.

  3. 3

    Watching the repair settle

    Wood that has been split and glued back, and screws that have been driven into fresh pilot holes, settle over their first few weeks. Check after a month that the bolt still throws without effort and that the strike and hinge screws are snug, then repeat at each change of season, since humidity swells doors in summer and shrinks them in dry winter air. A door that starts to need a shoulder, or a bolt that begins to catch on the strike lip, is asking for a small adjustment before it becomes a problem. Whatever lubricant and interval that new cylinder's own maker specifies keeps the key turning cleanly.

In the van

  • Two-part wood epoxy and shims
  • Jamb repair plate
  • Security strike box
  • Grade 1 deadbolt with one-inch throw
  • Wrap-around door edge reinforcer

What affects the quote

  1. 1

    Distance to the property

    Travel is part of every emergency call, and a property well outside the usual service area involves more driving time, which appears in the quote.

  2. 2

    Hour of the call

    Break-ins are discovered at all hours, and the amount for securing and repairing the damage is the same whatever hour that turns out to be. The locksmith confirms the exact figure on site once the extent of the damage has been assessed.

  3. 3

    Door and frame material

    A wood jamb over a stud takes standard reinforcement. Steel frames, jambs on masonry, fibreglass doors and aluminum storefront stiles each need their own fasteners and methods, which changes both labour and parts.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(249) 488-0915

Break-In Damage Lock Repair: questions

Advice · (249) 488-0915

My car was stolen with the garage remote and a house key inside. What now?

Treat it as two exposures. The house key is handled by rekeying every lock it fits. The remote is handled at the garage door opener: its memory is erased so every old remote stops working, and new remotes are programmed. If the car had your address on its paperwork, do both before anything else. A locksmith can rekey the doors and, on many openers, clear the remotes during the same visit or show you the learn button on the motor unit.

Can the locksmith start before the police have finished?

The door is left as found until the police have seen it or said they will not attend. What can happen in the meantime is planning: the locksmith can look at the damage, photograph it, measure for hardware and prepare the temporary securing so that the moment the scene is released the work begins. Nothing is removed or moved before then, because the marks on the door are part of the report.

The intruder pried open our sliding patio door. Can it be made secure?

Yes. The panel goes back on its track and the broken latch is replaced, then the weaknesses a slider is born with are addressed: anti-lift blocks in the upper channel so the panel cannot be raised off its rollers, a foot bolt or pin lock through the frame at the bottom, and an auxiliary keyed lock if the latch alone is flimsy. A bowed frame may need a door installer, with the opening secured until they come.

Peterborough, Ontario

Trent Lakes information

Town
Trent Lakes, Peterborough, Ontario
In business
32 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

47%

Homes of every age. About 47% of homes in Trent Lakes were built in 1980 or earlier, according to the 2021 Census.

Mixed housing stock keeps a locksmith versatile. A morning might be a heritage mortise lock rebuilt and an afternoon a smart lock paired to a phone on a steel door. The same care goes into both, with tools and parts for each.

99%

Mostly houses. Single-detached houses make up about 99% of homes in Trent Lakes (2021 Census).

Detached houses collect hardware from every renovation. A locksmith visiting one often finds three keyways, two finishes and one door that never latched right. Sorting all of that into a consistent, working set is a satisfying afternoon's work.

Source: Statistics Canada, 2021 Census of Population

Open Trent Lakes in Google Maps

Open 24/7

Request a visit

There is a hole where the cylinder used to be.

Call now · open 24/7(249) 488-0915
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 32 years in business