Skip to content
Avery Point Lock & Key SpecialistsRequest a visit
Open 24/7(249) 488-0915Call now
Technician inspecting splintered wood around a door-frame strike plate. — Break-In Damage Lock Repair, Kinmount

Emergency Lockouts · Kinmount

Break-In Damage Lock Repair in Kinmount

There is a hole where the cylinder used to be. Somebody twisted it out of the deadbolt with a wrench, and now the empty bore looks straight through to the kitchen, with the bolt still stuck in the frame.

Call now · open 24/7(249) 488-0915

Request a visit

In plain words

Break-in damage lock repair is the visit that turns a forced door back into a locked one. The locksmith first confirms you own, rent or manage the property, then looks at everything the attack touched: the lock, the bolt, the strike plate and wood behind it, the door edge, the hinges and any glass beside the door. The opening is secured before the visit ends, and the parts that gave way are replaced with stronger hardware and longer fasteners set into the framing. Any lock a taken key could open is rekeyed or replaced, so the house is closed on your terms again.

Sound familiar?

There is a hole where the cylinder used to be. Somebody twisted it out of the deadbolt with a wrench, and now the empty bore looks straight through to the kitchen, with the bolt still stuck in the frame.

How the visit goes

Break-In Damage Lock Repair · Kinmount

How the visit goes

Technician holding a steel deadbolt to the round bore in a white door, with an open tool bag on a dark mat. — Kinmount
  1. 1

    Photographs before parts move

    Nothing on the door is touched until it has been photographed as found. The locksmith records the door face and edge, the lock and cylinder, the strike and the wood around it, the hinges, the jamb and any broken glass, plus the tool marks that show how entry was made. These images serve the police occurrence file and the insurance claim, where insurers ask for damage to be documented and damaged property kept. You are encouraged to take your own set too. Once the record exists, hardware can come off and the repair can start without anyone later wondering what the door looked like at the beginning.

  2. 2

    Rebuilding the strike side

    The strike is where most forced doors failed, so it is rebuilt rather than reattached. The old plate comes off and the bolt pocket is cut to full depth, since a pocket that is too shallow stops the bolt from extending completely and leaves it easier to push back. A security strike with a boxed pocket is set flush into the jamb, its long screws driven through the jamb and shim space into the wall stud, with the longest screws placed nearest the door stop where the bolt bears. Pilot holes are drilled first so the screws seat without splitting the repaired wood. The bolt now pushes against framing lumber instead of two short screws in soft trim.

  3. 3

    A door that closes and locks again

    The visit ends with the door tested the way it will be used. The bolt is thrown and withdrawn with the door open, then closed, and it must slide home without dragging on the strike or stopping short of full extension. The latch catches when the door is pushed to, not slammed. The door meets its weatherstrip evenly and the thumb-turn works from inside without a key. You try it yourself before the locksmith packs up, with your own new key, so the first time the household locks up that night is not the first time anyone has tried the door.

In the van

  • Two-part wood epoxy and shims
  • Jamb repair plate
  • Security strike box
  • Grade 1 deadbolt with one-inch throw
  • Wrap-around door edge reinforcer

What affects the quote

  1. 1

    Sliding door hardware

    Putting a slider back on its track, replacing its latch and adding anti-lift blocks, a foot bolt or an auxiliary lock is a different parts list from a hinged door, and is quoted as such.

  2. 2

    Lock failure or frame failure

    Replacing a lock is hardware and fitting time. Rebuilding a strike side with a boxed strike, epoxy and long screws into the stud is carpentry as well, and is quoted as its own line.

  3. 3

    Door edge reinforcement

    A wrap-around edge reinforcer is added when the wood around the bore is crushed or split. It is a separate part, chosen to suit the door thickness and the hardware going into it.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(249) 488-0915

Break-In Damage Lock Repair: questions

Advice · (249) 488-0915

My car was stolen with the garage remote and a house key inside. What now?

Treat it as two exposures. The house key is handled by rekeying every lock it fits. The remote is handled at the garage door opener: its memory is erased so every old remote stops working, and new remotes are programmed. If the car had your address on its paperwork, do both before anything else. A locksmith can rekey the doors and, on many openers, clear the remotes during the same visit or show you the learn button on the motor unit.

Can the locksmith start before the police have finished?

The door is left as found until the police have seen it or said they will not attend. What can happen in the meantime is planning: the locksmith can look at the damage, photograph it, measure for hardware and prepare the temporary securing so that the moment the scene is released the work begins. Nothing is removed or moved before then, because the marks on the door are part of the report.

The intruder pried open our sliding patio door. Can it be made secure?

Yes. The panel goes back on its track and the broken latch is replaced, then the weaknesses a slider is born with are addressed: anti-lift blocks in the upper channel so the panel cannot be raised off its rollers, a foot bolt or pin lock through the frame at the bottom, and an auxiliary keyed lock if the latch alone is flimsy. A bowed frame may need a door installer, with the opening secured until they come.

Kawartha Lakes, Ontario

Kinmount information

Town
Kinmount, Kawartha Lakes, Ontario
In business
32 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

56%

Older homes. About 56% of homes in Kawartha Lakes were built in 1980 or earlier, according to the 2021 Census.

Where most homes were built decades ago, doors often still carry their original mortise locks and brass knobs. That hardware can usually be cleaned, re-sprung and kept in service, with a modern deadbolt added above it for strength without losing the look.

84%

Mostly houses. Single-detached houses make up about 84% of homes in Kawartha Lakes (2021 Census).

Families in houses hand keys to children, cleaners, dog walkers and neighbours. A locksmith can set up a keypad on the side door for the household and keep the front door on a conventional key, so access matches how the family actually comes and goes.

Source: Statistics Canada, 2021 Census of Population

Open Kinmount in Google Maps

Open 24/7

Request a visit

There is a hole where the cylinder used to be.

Call now · open 24/7(249) 488-0915
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 32 years in business